How to install Kloxo on VPS and dedicated server

Prerequisites

1) A dedicated or virtual server running CentOS or Red Hat EL 5.x. CentOS 6.x is not currently supported.
2) At least 256 MB of RAM (enough to run Yum).
3) At least 2 GB of free disk space for Kloxo and related services.
4) If you partitioned your disks manually, make sure you have a large /tmp. Kloxo uses /tmp to create and store backups temporarily and the process will fail if there is not enough space.

Before we begin...

You have to disable SELinux by editing /etc/sysconfig/selinux and changing the line to selinux=disabled. This will keep SELinux from being enabled on your server next boot.

Then you must run the following command as root to disable SELinux for the current session:

# su - root
# setenforce 0


If you are unsure this procedure worked, you can run /usr/sbin/sestatus to check its status. Failure to correctly disable SELinux will render your Kloxo install useless and an OS reload may be required to properly reinstall it.
Also, make sure the ports 7778/tcp and 7777/tcp are open in your server firewall or you won't be able to connect to Kloxo web panel when the install completes.

Installing Kloxo

Kloxo installation consists of downloading kloxo-installer.sh from download.lxcenter.org and executing it as root. The script will present you with a few questions and sometimes ask for a password (enter your root password).

If you don't have MySQL server already installed, you must run:

# su - root
# yum install -y wget
# wget http://download.lxcenter.org/download/kloxo/production/kloxo-installer.sh

To install as Master (Default Single Server):
# sh ./kloxo-installer.sh --type=master

To install as Slave:
# sh ./kloxo-installer.sh --type=slave


If you already have MySQL installed and set a root password, you must run:

# su - root
# yum install -y wget
# wget http://download.lxcenter.org/download/kloxo/production/kloxo-installer.sh
# sh ./kloxo-installer.sh --type=<master/slave> --db-rootpassword=PASSWORD


Once kloxo is installed, you can connect to http://YOUR_SERVER_IP:7778 and you will be presented with a login screen. Login as admin with password admin and once you are in, Kloxo will ask you to change the default password to a secure one.

  • 112 Users Found This Useful
Was this answer helpful?

Related Articles

Change of the reverse DNS record for VPS hosting and dedicated server

To change the reverse DNS record for IP address, you’ll need to contact the support department in...

Checking of open connections

If you want to see the open connections to port 25 on your virtual private server or dedicated...

Do I have full root access to my VPS

Yes you do. With virtual hosting (VPS) you get root password for access, trough which you have...

Do I have my own IP address with my virtual server

Yes you do. We provide your own IP address to each virtual private server. If you need more than...

How to create .tar.gz archive

Creating .tar.gz archive can be done with one command. Use the following: tar -pczf...

Powered by WHMCompleteSolution